Guide

Small-office network maintenance checklist

Reviewed by Alex Rusakovich, Founder ·

Network maintenance for a small office is a short list of checks you repeat on a schedule, so the firewall, switches and Wi-Fi keep working and stay hard to break into. Every month, install firmware updates on the firewall, switches and access points, look for warning lights and error messages, check the list of connected devices for anything you don’t recognize, and confirm guest Wi-Fi is still separate from the business network. Every quarter, replace any default admin passwords, review who has admin access, change the staff Wi-Fi password after someone leaves, delete firewall rules and port forwards nobody needs, run the UPS power unit’s self-test and label new cables. Once a year, look up the end-of-support date for every network device, walk the office to test Wi-Fi coverage, compare your internet plan with real use and update a simple network diagram. Write it all down in one place that someone else could pick up.

What does network maintenance actually mean for a small office?

Your office network is the internet connection, the firewall where it enters the building, the switches, the Wi-Fi access points, the cabling and the UPS power unit that keeps it all running through a short power cut. Maintenance means keeping that equipment current, knowing what is connected to it, and closing doors you no longer use.

Most offices set the network up once and leave it until something breaks. Problems build up quietly: updates nobody installed, a former employee who still knows the Wi-Fi password, a port opened for a camera system removed years ago.

Network upkeep is one part of keeping the office secure. Pick one person to own this checklist, put the dates in a shared calendar and note what was done. Staff member or outside provider, the checks are the same.

What should you check every month?

  • Firmware on the firewall, switches and access points. Install the available updates. The FTC’s advice to small businesses is to “Keep the router’s software up to date” (FTC: cybersecurity for small business). Read the release notes first, update after hours because devices restart, and do one device at a time.
  • Lights, alerts and error messages. Look for amber or blinking warning lights, a fan that has gone loud, or a dark port where a desk should be connected. Then read the firewall’s alerts: internet drops, devices restarting, repeated failed sign-ins.
  • Devices you don’t recognize. Compare the connected-devices list in the firewall or Wi-Fi system with what you know is in the office. The FTC says to “Limit your primary business network to business-owned, operated, or managed devices.” Block anything nobody can explain.
  • Guest Wi-Fi is still separate. Visitors and staff-owned phones belong on a guest network that is, in the FTC’s words, “separate from and not connected to your business network.” Join it with a phone and check that it can’t see your printers or shared folders.

What should you check every quarter?

  • Admin accounts and default passwords. No network device should still use the password it shipped with; the FTC’s list for small businesses includes “Change default manufacturer passwords.” Everyone who manages the network should sign in with their own account, and former staff and old vendors should have none. Turn on multi-factor sign-in wherever the device supports it: the FTC recommends it for “all employees, contractors, and others who access your network and devices.”
  • The staff Wi-Fi password. If anyone has left since it was last changed, change it now. The FTC tells businesses to “Terminate their passwords” as part of the check-out routine (FTC: protecting personal information). While you are there, confirm the network uses WPA3 or WPA2. The Wi-Fi Alliance says WPA3-Personal gives “increased protections from password guessing attempts” (Wi-Fi Alliance: security).
  • Firewall rules and port forwards. Rules pile up: a port opened for a vendor, an old camera recorder, a remote-access tool someone tried once. The FTC notes that a firewall is “only as effective as its access controls” and says to “review them periodically.” Delete any rule or port forward nobody can explain, and turn off remote management from the internet. If staff need to reach the office from outside, use a VPN with multi-factor sign-in instead of an open port; the FTC suggests a VPN for staff who connect remotely (FTC: secure remote access).
  • The UPS power unit. Run its self-test. APC by Schneider Electric says that if the self-test fails, the batteries must be replaced, and that batteries past their service life should be replaced even if the test passes (APC: UPS self-test). APC also says most of its batteries “should last three to five years” and that heat shortens that sharply (APC: battery life), so keep the network closet cool.
  • Labels. Label every new cable at both ends, mark the important ports on the firewall and main switch, and update the diagram if anything moved.

What should you check once a year?

  • End-of-support dates. Look up the support end date for the firewall, every switch and every access point on the maker’s website. Netgear, for example, says products that reach end of service “no longer receive firmware updates, including important security updates” (Netgear: end of service). Cisco publishes a last date of support, after which “support is no longer available” (Cisco: end-of-life policy). Budget for replacements before those dates, not after a failure.
  • A Wi-Fi coverage walk. Walk the whole office with a laptop or phone, including conference rooms, the back office and the warehouse floor. Note where the signal drops or calls break up. New walls, filing cabinets and extra staff all change coverage.
  • Your internet plan against real use. Run a speed test at a busy time and compare it with what you pay for. Check when the contract renews, and whether a second line from another provider is worth it if a day offline costs more.
  • The network diagram. One page showing the internet connection, firewall, switches, access points and what plugs into what. The FTC tells small businesses to “Create, categorize, and maintain an inventory of hardware, software, data, and services” they use; the diagram is the network part of that.

What are the warning signs you shouldn’t ignore?

Don’t wait for the next scheduled check if you see any of these:

  • Wi-Fi or internet drops at the same time each day, or whenever the office is busy.
  • A switch, access point or the firewall restarts on its own.
  • The UPS power unit beeps, shows a replace-battery light or fails its self-test.
  • A device you don’t recognize keeps coming back on the network.
  • Admin sign-ins, new rules or changed settings that nobody in the office made.
  • An update that won’t install, or a notice that a model has reached end of support.
  • Nobody knows the admin password to the firewall.

What should be written down?

Keep one document that a new office manager or IT provider could pick up and use:

  • Device list: make, model, serial number, location, firmware version and end-of-support date for every network device.
  • Admin access: who has an admin account on each device. Keep the passwords themselves in a password manager, not in the document.
  • Internet provider: account number, circuit ID and support phone number.
  • Wi-Fi networks: which is for staff, which for guests, and when each password last changed.
  • Firewall rules and port forwards: what each is for, who asked for it and when.
  • Settings: keep a saved copy of the firewall and switch settings, refreshed after every change, next to the network diagram.
  • A change log: the date, what changed and who did it.

Need help?

Comp IT Service looks after office networks across Cleveland, Brunswick, Medina and Akron with managed network services and supports the computers and accounts around them with managed IT services. If this checklist raised questions you can’t answer, such as who holds the firewall’s admin password, our free security assessment is a good first step: it reviews your network and security and shows you what we would fix first. Call (330) 741-1331, email support@compitservice.com or use our contact page.

More guides and help

Moving offices IT checklist

When to order internet, what to check at the new space, moving day and what to update afterwards.

Learn more

Switching IT providers

What to collect from the old provider, the order to switch in and how to close their access.

Learn more

Windows Server 2016 end of support

What stops on January 12, 2027, how to check your server and the options for a small office.

Learn more

W-2 and payroll scams

How the W-2 request scam and payroll diversion work, and what a small office should set up before tax season.

Learn more

Microsoft 365 plans compared

Business Basic, Standard or Premium: what each Microsoft 365 plan includes, what it costs, and which fits a small office.

Learn more

Ohio cybersecurity checklist

A small-office security checklist and what Ohio’s Data Protection Act says about writing it down.

Learn more

Outsourced vs in-house IT

Hire an IT person, outsource or mix both: costs, trade-offs and a decision checklist.

Learn more

Choosing an IT support company

What to ask, what the contract needs and which red flags to avoid before you sign.

Learn more

Moving Microsoft 365 off GoDaddy

How we moved our own Microsoft 365 off GoDaddy without losing email, in the order that works.

Learn more

The first hour after a phishing click

A step-by-step checklist for the hour after someone clicks a bad link.

Learn more

SPF, DKIM and DMARC

The three email records that stop people sending mail in your name.

Learn more

Networks, Wi-Fi & cameras

Reliable networks, Wi-Fi, VPN and security cameras.

Learn more

Get your free assessment

Tell us what you need. We’ll get back to you within 24 hours.

(330) 741-1331 · support@compitservice.com

Scroll to Top